How to Remove a Tyre from a Car

Knowing how to remove a tyre from a car can be useful for various situations, such as changing a flat tyre or performing maintenance. Here's a step-by-step guide:

1. Prepare the Necessary Tools

Gather the required tools, including a jack, lug wrench, and possibly a wheel chock or blocks for added safety.

2. Loosen the Wheel Nuts

Using the lug wrench, loosen the wheel nuts or lug nuts on the tyre that needs to be removed. Do not remove them completely at this stage.

3. Elevate the Vehicle

Place the jack in the appropriate lifting point designated by the car manufacturer. Carefully elevate the vehicle until the tyre is off the ground.

4. Remove the Wheel Nuts and Tire

Once the vehicle is lifted, remove the loosened wheel nuts or lug nuts completely. Gently pull the tyre straight towards you to detach it from the wheel hub.

5. Inspect the Tyre and Replace if Necessary

While the tyre is off, inspect it for any signs of damage or wear. If the tyre is in poor condition, consider replacing it with a new one.

6. Reinstall or Replace the Tyre

If you removed the tyre for maintenance, simply reinstall it by aligning the wheel studs with the appropriate holes on the wheel hub. Tighten the wheel nuts in a star pattern until they are snug. If you replaced the tyre, follow the same steps with the new tyre.

7. Lower the Vehicle and Finalize

Using the jack, carefully lower the vehicle until all wheels are back on the ground. Finish tightening the wheel nuts in a star pattern with the lug wrench.

Remember to consult your vehicle's owner manual for any specific instructions or precautions related to tyre removal. Practice caution and safety measures when working on your vehicle.